Overview
EP94Z1E is a Low
Power HDMI/MHL Receiver with VGA/Audio outputs and embedded MCU. The chip
accepts HDMI/MHL dual-mode input and convert the input signalling to VGA and
Audio outputs. The chip supports HDMI/MHL dual-mode receiving and HDCP
decryption. The VGA output port supports 10-bit resolution up to 165Mhz pixel
rate (1080p and UXGA). The Audio output port supports 8-channel IIS, S/PDIF and
DSD audio outputs. The chip is compliant with HDMI 1.4b, MHL 1.1 and HDCP 1.4
specifications. The chip also supports on-chip HDCP Keys and EDID Memory. With
an embedded MCU on-chip, the chip does not require external MCU or EE in
applications. User is not required to develop the software.
Feature
•On-chip embedded
MCU. No external MCU or EE is required. No software development is required
•Support HDMI/MHL dual-mode receiving which is compliant with HDMI 1.4b and MHL
1.1 specifications
•Integrated on-chip EDID Memory
•On-chip HDCP Engine which is compliant with HDCP 1.4 specification
•Integrated on-chip HDCP Keys
•Support VGA output with 10-bit resolution upto 165Mhz pixel rate (1080p and
UXGA)
•Support both Separated-Sync and Sync-On-Green in VGA output
•Support 422 to 444 conversion
•Support YCC to RGB conversion in ITU-R BT.601 and 709 color space
•On-chip Audio Decoder which support 8-channel IIS, S/PDIF and DSD audio
outputs
•Support LPCM, Compressed Surround Audio, HD (HBR) Audio and DSD audio
•Support SPDIF Channel Status extraction
•Support audio soft mute
•3.3V and 1.8V power required
•Support Power Down mode and low stand-by current (< 1mA)
•64-Pin LQFP package
